manualshive.com logo in svg
background image

12.0: WARRANTY

No maintenance of the

 Power V™ 

loudspeakers is necessary.

All Tannoy professional loudspeaker products are covered by a 5 year warranty from the date of manufacture (1 year for electronics), subject
to the absence of misuse, overload or accidental damage. Claims will not be considered is the serial number has been altered or removed.
Work under warranty should only be carried out by a Tannoy Professional dealer or service agent. This warranty in no way affects your statutory
rights. For further information please contact your dealer or distributor in your country. If you cannot locate your distributor please contact
Customer Services, Tannoy Ltd at the address given below.

Customer Services, Tannoy Ltd., Rosehall Industrial Estate, Coatbridge, Strathclyde, ML5 4TF, Scotland.

Telephone:

01236 420199

(National)

+44 1236 420199

(International)

Fax:

01236 428230

(National)

+44 1236 428230

(International)

E-Mail:

[email protected]

DO NOT SHIP ANY PRODUCT TO TANNOY WITHOUT PREVIOUS AUTHORISATION

Our policy commits us to incorporating improvements to our products through continuous research and development. Please confirm current
specifications for critical applications with your supplier.

22

13.0: DECLARATION OF  CONFORMITY

The following apparatus is/are manufactured in UK by Tannoy Ltd of Rosehall Industrial Estate, Coatbridge, Scotland, ML5 4TF. The following
equipment is marked with the CE label and conform(s) to the protection requirements of the European Electromagnetic Compatibility Standards
and Directives. The apparatus is designed and constructed such that electromagnetic disturbances generated do not exceed levels allowing
radio and telecommunications equipment and other apparatus to operate as intended, and, the apparatus has an adequate level of intrinsic
immunity to electromagnetic disturbance to enable operation as specified and intended.

Details of the Apparatus:

Power V6
Power V8
Power V12
Power V12HP
Power V15
Power VS10BP
Power VS15BP

The equipment listed above is covered by this certificate and marked with the CE-label conforms with following standards:

EN 60065

 

Safety requirements for mains

(IEC 60065)

 

operated electronic and related apparatus for household and similar general use

EN 55103-1

 

Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for 
professional use. Part 1: Emission.

EN 55103-2

 

Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for 
professional use. Part 2: Immunity.

With reference to regulations in following directives:
73/23/EEC, 89/336/EEC

Signed:

Position:

Engineering Director – Professional Products, Tannoy Professional

Date:

14/06/2006

For Tannoy Ltd

Содержание V12HP





























Отзывы: