Tannoy V12HP, Руководство пользователя

Страница: 13 / 28

13
10.0: RIGGING
The Tannoy Professional hardware covered in this guide has been designed to offer quick, simple, cost
effective and secure solutions for mounting specific Tannoy Professional loudspeakers. This hardware has
been designed and manufactured with a high safety load factor for its specific role. To ensure the safest
possible use of the hardware covered in this guide, it must be assembled in strict accordance with the
instructions specified. The information in these manuals relating to the assembly and the safe use of these
accessories must be understood and followed. The installation of Tannoy Professional loudspeakers using
the dedicated hardware should only ever be carried out by fully qualified installers, in accordance with all
the required safety codes and standards that are applied at the place of installation.
WARNING: As the legal requirements for flying change from country to country, please consult you local safety standards
office before installing any product. We also recommend that you thoroughly check any laws and bylaws prior to commencing
work.
Tannoy Professional hardware has been designed for use with specific Tannoy Professional loudspeakers, and is not designed
or intended for use with any other Tannoy Professional products, or any other devices. Using Tannoy Professional hardware
for any purpose other than that indicated in this guide is considered to be improper use. Such use can be very dangerous as
overloading, modifying; assembling in anyway other than that clearly stated in the manual, or damaging Tannoy Professional
hardware will compromise safety.
The component parts of any Tannoy Professional hardware device must only be assembled using the accessory kits supplied
and in strict compliance with the user manual. The use of other accessories or non-approved methods of assembly may result
in an unsafe hardware system by reducing the load safety factor. Welding, or any other method of permanently fixing hardware
components together or to the integral fixing points in the cabinet should never be used.
Whenever a Tannoy Professional loudspeaker is fixed to a surface using a Tannoy Professional hardware device, the installer
must ensure that the surface is capable of safely and securely supporting the load. The hardware employed must be safely,
securely, and in accordance with the manual, attached both to the loudspeaker and also to the surface in question, using only
the fixing holes provided as standard and covered in the manual. Secure fixings to the building structure are vital. Seek help
from architects, structural engineers or other specialists if in any doubt.
All loudspeakers flown in theatres, nightclubs, conference centre or other places of work and entertainment must, be provided
with an independent, correctly rated and securely attached secondary safety - in addition to the principle hardware device.
This secondary safety must prevent the loudspeaker from dropping more than 150mm (6”) should the principle hardware device
fail.
10.1: SECUR ET™ - V6Y YOKE BRACKET
The V6Y is a discreet yoke style bracket, available in both black and white, and is used to mount the Tannoy V6 in both portrait
and landscape orientations. The Tannoy V6 loudspeaker is fixed to the bracket using the M6 bolts and washers supplied in
the accessory pack
Only the screws, fasteners, shakeproof and plain washers specified on figure 3. should be used to assemble the VMY bracket.
The arms of the V6Y have long slots, through which M6 bolts are fitted, and screwed into the integral M6 inserts in the top
and bottom of the Tannoy V6 cabinet.