e): Two PS350B•s with preamp and 5
channel amp - utilizing bass management
1. Connect the Left Front and Center outputs of the pre-
amp to the Left and Center inputs of the PS350B Sub 1.
Connect the Right Front and Center outputs of the pre-
amp to the Center and Right inputs of the PS350B Sub 2.
Using a "Y" connector, connect the "LFE" or "Sub Out" of
the preamp to the LFE inputs of both PS350B•s. Connect
the Left and Center outputs on PS350B Sub 1, to their
corresponding channels on the 5 channel amplifier. Take
the Right output of Sub 2 and connect it to the correspon-
ding channel in the 5 channels amp.
2. Set the LCR Variable Crossover. A good starting point
for the crossover is between 80 Hz and 100 Hz. Note:
Refer to LCR Variable Crossover (4.H.) for further details.
3. Phase set to 0 deg.
Note:
Refer to Phase Switch (4.M.)
for further details.
4. Bass boost set to Min. Note: Refer to LF Boost (4.K.)
for further details.
5. Place the 1 Sub/2 Sub switch in the •2 SubŽ position
on only one
of the two PS350B•s.
6. Set the Sub Level on the PS350B to Min initially.
LF E
In
R
C
L
In
Out
1 S ub
2 S ubs
P S 350
S ub 2
P os itioned
C enter R ight
LF E
In
R
C
L
In
Out
P S 350
S ub 2
P os itioned
C enter Left
1 S ub
2 S ubs
In
Out
LF
LR
C
R F
R R
P reamp
LF
LR
C
R F R R
F ive C hannel
Amp
R ight R ear
R ight Front
Left Front
Left R ear
C enter
figure 5
f): Stereo setup with one PS350/PS350B
utilizing internal filtering
1. Connect a cable from the signal source left output to the
PS350/PS350B Left input. Connect the Left subwoofer out-
put to the power amplifier left input. Repeat for the right
channel.
2. Phase set to 0 deg. Note: Refer to Phase Switch (4.M.)
for further details.
3. Bass boost to Min. Note: Refer to LFE Boost (4.K.) for
further details.
4. Set the Sub Level control on the PS350/PS350B to Min
initially.
Power Amp
Signal
Source
IN
OUT
L
C
R
PS350/PS350B
IN
IN
LEFT SPEAKER
RIGHT SPEAKER
OUT
OUT
OUT
OUT
g): Stereo Setup using two PS350/PS350B•s
utilizing internal filtering.
1. Connect a cable from the Signal Source Left output to the
Left input of the left side subwoofer. Connect the Left sub-
woofer output to the left input of the power amplifier. Repeat
for right channel.
2. Phase set to 0 deg. Note: Refer to Phase Switch (4.M.)
for further details.
3. Bass boost to Min. Note: Refer to LFE Boost (4.K.) for fur-
ther details.
4. Set the Sub Level control on the PS350/PS350B to Min
initially.
2 Channel
Power Amp
Signal
Source
IN
OUT
L
C
R
PS350/PS350B
IN
OUT
L
C
R
PS350/PS350B
RIGHT
LEFT
IN
IN
LEFT SPEAKER
RIGHT SPEAKER
OUT
OUT
figure 6
figure 7
Stereo setup
using one
PS350/PS350B
utilizing internal
filtering
Stereo setup
using two
PS350/PS350B•s
utilizing internal
filtering
