Tannoy LIVE MINI, Быстрый старт

Страница: 10 / 14

18 LIVE MINI 19 Quick Start Guide
BLUETOOTH CONNECTION
The procedure for setting up a typical
Bluetooth connection is as follows:
First, read the documentation that came
with your device, and become familiar
with the Bluetooth operation procedures
and details.
Make sure that your device has
Bluetooth enabled.
Turn on the Power to the LIVE MINI.
The BT LED will fl ash, showing it is trying
to pair with your device.
If the TANNOY LIVE MINI does not appear
in your device list, press the BT button on
the LIVE MINI for 3 seconds.
When the TANNOY LIVE MINI appears in
your device list, select it and it will be
paired. The BT LED will turn on steady.
In operation, the + and - buttons can
be used to increase and decrease the
volume, and the previous and next
buttons can be used to move up and
down your playlist.
While connected via Bluetooth, incoming
calls can be answered by pressing the
Multi Function Button (MFB), and
using the internal microphone on the
LIVE MINI to talk.
The Operations Table on the next page
shows some of the details of operation.
Troubleshooting
Problems with the Bluetooth connection
may be fi xed using the following points:
Try pressing and holding the
+ and - buttons on the LIVE MINI for
5 seconds. Then try pairing again
from new.
Try deleting any previous instances of
“TANNOY LIVE MINI” in your device, and
then try pairing again from new.
AUX CONNECTION
The 3.5 mm TRS input connection on the
rear of the LIVE MINI allows connection
to the line-level audio output of various
devices including computers and
MP3 players, for example.
When a connection is made to the Aux
input, the LIVE MINI will automatically
switch to play the incoming audio, rather
than Bluetooth devices.
In operation, the + and - buttons can
be used to increase and decrease the
volume, and the MFB button can be used
to Mute the sound.
Operations Table
Function Name Status Operation Remark LED Status
Turn On Off Press and hold
the POWER
button until
the Power LED
lights up LIVE MINI will start to
connect to the
last used device,
if the device list is
not empty. Otherwise
it will enter
pairing mode. Power LED ON for
10 seconds (when not
on the charger).
The LED color shows
battery charge status:
Green: >50%
Yellow: between
20% and 50%
Red: Battery Low
Turn Off On Press and hold
the POWER
button until
the Power LED
turns red and
then off Power LED Off
Show battery
status On Press the
POWER button Power LED turns on
for 3 seconds Power LED color shows
the charge status as
above.
Bluetooth mode (BT=Bluetooth, MFB=Multi-Function Button)
Enter pairing On, but
not in
call-active
state Hold BT button
for 3 seconds LIVE MINI is ready
for pairing and
connecting.
This expires in
5 minutes. BT LED fl ashes
blue slowly
Manual
Connection
Request Idle state Press MFB
button LIVE MINI starts to
connect to the last
used device. No change
BT connection
established
BT LED
On steady
Volume Up Music
playing
or a call is
active Press '+'
button BT LED fl ashes once
Volume Down Music
playing
or a call is
active Press '-' button BT LED fl ashes once
(EN)
Step 3: Getting started