TANGRA EVB - HiE, Инструкция по установке и обслуживанию

Страница: 21 / 28

Rev.2013-08-25-01
20
7. Decommissioning
When decommissioning a unit, the following activities are to be carried out:
•
When dismantling a unit, all components, which are under voltage, must be switched off. The
unit must be fully disconnected from the electrical network.
•
All water sections (if any) must be drained. Blown the coils with pressure air to secure that no
fluid is left, otherwise the water can freeze, when the temperature is low.
•
Remove contaminated filters.
•
All multiple leaf dampers (if any) must be closed.
•
Fans must be protected from vibration, if it is necessary to transport the fan section.
•
For transport or moving the unit to a new place, all parts must be secured according to the
instruction for transport.
•
Follow the instruction when transport, lifting, loading and uploading the unit.
•
If you can handle this alone, please, contact the manufacturer.
7.1 Dismantling and disposal
After the “lifetime” of the unit is run out, it must be professionally dismantled. Prior to dismantling, it
must be ensured that all energy lines (electrical and all media) are switched off. No lines should
remain supplied with voltage, temperature or other energy. All components are to be disposed or
recycled in accordance to national regulations.
.
8. Emergency activities
In case of emergency the installation stops automatically, in order to prevent its components from
damages.
If you have any doubts, that the air handling unit does not work or the service personnel could not
deal with an emergency situation, turn the air handling unit off, using the main switch S1, and turn
off the power supply to the electrical board. Take all necessary measures to prevent fire, electrical
shock or environmental pollution and contact TANGRA’s local service team
Contacts:
Phone: +359 2 925 05 99, 925 06 10,
Fax: +359 2 925 05 57
E-mail: office@tangra.bg,
www.tangra.bg
All national regulation for fire protection must be observed.