TANGRA EVB - HiE, Инструкция по установке и обслуживанию

Страница: 14 / 28

Rev.2013-08-25-01
13
4. Transport and storage
4.1 Transport
The units are supplied fully assembled on a pallet.
When transport the unit use its original packing and follow instructions given.
All operations involving the lifting and handling of the unit must be carried out with the utmost
caution, avoiding any knocks that could compromise the functionality or damage the unit
components.
During transport, special attention should be paid to all connections (drainage, electrical parts, etc.).
In order to prevent damages on the unit all removable parts should be closed and locked during
transportation.
During transport with truck, the unit should be tightened with belts or ropes that ensure the unit
could not move. All movements of the unit should be done with suitable equipment. Assembly
components weight should be checked prior to transport.
All unit components should be inspected for transport damages immediately upon delivery with
annotations made on the delivery slip as appropriate. Damages, caused during transport, which are
not annotated, cannot be taken into consideration.
4.2 Loading
The units could be loaded, uploaded, lifted or moved with suitable equipment, such as forklift truck,
crane or hand lift truck. Unit’s dimensions and weight should be checked prior to transport.
The unit is supplied on pallet, wrapped in protective film and with protective corners, made of fibran.
When unit is loaded/uploaded with fork lift truck, the fork’s length shall be longer than the unit’s.
When transporting with hand lift truck, the forks must completely underlie the assembly
components. If the equipment is larger than the hand lift truck, a second hand lift truck should be
used for transportation.
4.3 Storage
All unit’s components or the entire unit should be stored in safety places, protected against
penetration of moisture and dust and other substances that can cause corrosion. The opening of the
unit should be covered with folio in order to protect the inner space from contamination (dust,
animals).
The air handling units and their components must be stored in indoor rooms, complying with the
following conditions::
•
-relative moisture
φ
<80% at t (temperature)=20°C.
•
-ambient temperature -40°C<t<+60°C.
The warranty is not valid for damages, caused by improper transportation, uploading
or storage.