8
Assembly & Disassembly and Cleaning of Dustbin
Assembly & Disassembly of Dustbin:
1.
Extract the dustbin by pressing the
key on it. (Refer to Figure 1 and
Figure
2.
Press the red button on it, and then
the
blower
will
pop
up
automatically. (Refer to Figure 3)
3.
Reverse the blower, release 2
fasteners and open the cover.
(Refer to Figure 4 and Figure 5)
Figure 4 Figure 5)
4.
Open the bracket and the filter will
appear. (Refer to Figure 6)
5.
Change a new filter, press the semicircle bracket by one
hand to release the fastener from the filter screen, and
remove the filter grid by the other hand and then change a
new one. (Refer to Figure 7)
6.
Reverse the dustbin, tear out the mop, release the trailing
bar and then unplug the right and left fasteners on the
bottom of the dustbin (Refer to Figure 8 and Figure 9). All
parts should be assembled as before disassembly.
Figure 8 Figure 9
:
Don’t use the mop and mopping part in the figure above on the carpet or uneven ground.
Figure 3
Figure 6
Figure 7
