19
Storage
The Robot should be stored in dry place with good ventilation.
Trouble shooting
The Cleaner doesn’t work or clean poorly
1.
Check whether turning on the switch.
2.
Check whether the dust box, filter and intake are clean, and whether the side brush works.
3.
Check whether the battery voltage declines greatly.
The remote control doesn’t work
1.
Check the battery status of the remote control.
2.
Check the battery status of the Robot.
3.
Whether check code between the remote control and main body.
4.
Check whether the remote control is within the available scope of the signal transmitting.
The Cleaner can not charge
1.
Check whether the adaptor is connected well with the charger and whether power LED of the recharger lights.
2.
Check whether the battery power is too low, in case of that, charge the Cleaner with the adaptor directly.
Increased noise in cleaning
1.
Clean the dust box and filter.
2.
Check whether the brush or side brush is too dirty.
The Cleaner stops working suddenly and rings intermittently
1.
Check whether the set cleaning time is over.
2.
Check whether there are failure codes on the display by reference of the followings.
Error Codes
Failure
Code
Failure Cause
Failure identify content
E001
Left ground detection
The sensing head was blocked or the cleaner was jammed on the step.
E002
Left-middle
ground
detection
The sensing head was blocked or the cleaner was jammed on the step.
E003
Right-middle
ground
detection
The sensing head was blocked or the cleaner was jammed on the step.
