5
For Retro-Fit of Glass Filler Only
1. Turn off water supply and drain lines.
2. Heat cube & unscrew glass filler from cube.
3. Apply Loctite 680, teflon tape or joint compound to the threads of no.
1
. Screw into cube of
no.
5
, then align and tighten no.
1
. Let Loctite 680 sit for 20 minutes.
4. Turn on water supply and check for leaks.
5
11
13
12
1
cube
For Glass Filler Valve Repair Kit
1. Unscrew no.
15
with flathead screwdriver.
2. Remove no.
14
spring.
3. Place new no.
15
and no.
14
into no.
1
.
4. Screw no.
15
until flush with no.
1
.
1
14
15
