6
General Instructions
Figure A
SS TRIGGER(1)
Contractor_______________________________________
Architect/Engineer_________________________________
CATCH/SCREW
GREASE(1)
SCREW(2)
6-32 X 3/8"
SPRING/TRIGGER
ASSEMBLY(1)
SUBASSEMBLY(1)
PIVOT PIN
DC-111 SILICONE
LOCTITE 222
FOR
TRIGGER
SCREW(1)
B-0108 Trigger Repair Kit -- 108T-RK
1. Shut off water supply to spray valve.
2. Using two phillips head screwdrivers, remove the two screws retaining the trigger
handle.
3. Remove the trigger handle and using a screwdriver, gently push the pivot pin out of
the body.
4. Unscrew screw in trigger lock. Remove trigger lock.
5. Make sure torsion spring is orientated with spring hooks facing up as shown in Figure
A below.
6. Place pin in valve body Apply 222 to threads of screw and screw through trigger catch
into valve body.
7. Apply silicone grease to o-rings on pivot pin and gently slide into valve body.
8. Locate trigger handle in place, line up the screw holes with the pivot pin assembly &
secure on each side with a screw.
9. To check functionality, depress trigger handle and engage trigger catch. Depress
trigger handle to disengage trigger catch.
Trigger Assembly
