4
General Instructions
Installation:
1. Shut off water supply and drain lines.
2. Remove old spray valve from hose, including handle if applicable. (See images 1 & 2)
Note: Make sure that the hose washer is still in place inside the hose barrel before install-
ing your new Jet Spray valve.
3. Install your new Jet Spray valve by threading top of valve into hose barrel. Tighten
with a pair of pliers or wrench if necessary. (See images 3 & 4)
Operation:
1. To activate Jet Spray valve, squeeze stainless steel trigger lever against grip. (See
image 5)
Optional: For continued
fl
ow, press the trigger lever and pull the metal latch over the
top of the trigger lever and release.
(See image 6)
2. To deactivate Jet Spray valve, release trigger lever. (See image 7)
Note: If trigger catch is engaged, squeeze trigger lever and release to deactivate.
Image 1
Image 2
Image 3
Image 4
Image 5
Image 7
Caution: Your Jet Spray valve produces a powerful water spray. Never aim at a person
or use for any purpose other than intended.
Image 6
