background image

Installation and

Maintenance

Instructions

KETTLE KADDY

B-0182, B-0183, B-0186, B-0187,
B-0188, B-0192, B-0193

Deutsch:

Installations- und
Wartungsanleitungen

Español:

la Instalación y las
Instrucciones de
Mantenimiento

Français:

les Instructions
d’Installation et
d’Entretien

Limited One Year Warranty

T&S warrants to the original purchaser (other than

for purposes of resale) that such product is free from
defects in material and workmanship for a period of
one (1) year from the date of purchase.  During this
one-year warranty period, if the product is found to
be defective, T&S shall, at its options, repair and/
or replace it.  To obtain warranty service, products
must be returned to...

T&S Brass and Bronze Works, Inc.

Attn:  Warranty Repair Department

2 Saddleback Cove

Travelers Rest, SC  29690

Shipping, freight, insurance, and other transpor-

tation charges of the product to T&S and the return
of repaired or replaced product to the purchaser are
the responsibility of the purchaser.  Repair and/or
replacement shall be made within a reasonable time
after receipt by T&S of the returned product.  This
warranty does not cover Items which have received
secondary finishing or have been altered or modi-
fied after purchase, or for defects caused by physi-
cal abuse to or misuse of the product, or shipment
of the products.

Any express warranty not provided herein, and

any remedy for Breach of Contract which might arise,
is hereby excluded and disclaimed.  Any implied
warranties of merchantability or fitness for a particu-
lar purpose are limited to one year in duration.  Under
no circumstances shall T&S be liable for loss of
use or any special consequential costs, expenses
or damages.

Some states do not allow limitations on how long

and implied warranty lasts or the exclusion or limi-
tation of incidental or consequential damages, so
the above limitations or exclusions may not apply
to you.  Specific rights under this warranty and other
rights vary from state to state.

P/N: 098-003156-45  Rev.3

Date: 980707

Drawn: CW

Checked: MAB  10-16-98

Approved: MW   10-15-98

Содержание B-0182























Отзывы: