Tandem t:slim X2, Руководство пользователя, Страница: 77 / 198

Customer Technical Support:
(877) 801-6901 77
Key Pump Featur
es
2
Chapter 6 – Personal Profiles
set up any required settings before you
can continue.
The ranges you can set for Timed
Settings are:
•
Basal (range: 0 and 0.1 to 15 units/
hr)
•
Correction Factor (range: 1 unit:1
mg/dL to 1 unit:600 mg/dL)
•
Carb Ratio (range: 1 unit:1 gram to
1 unit:300 grams)
Below a carb ratio of 1:10, incre-
ments can be entered in 0.1 g. For
example a carb ratio of 1:8.2 can
be programmed.
•
Target BG (range: 70 mg/dL to 250
mg/dL)
In addition, you can set any or all of
the following Bolus Settings:
•
Carbs (on indicates entering grams
of Carb; off indicates entering units
of insulin)
•
Insulin Duration (how long a bolus
lowers your BG)
•
Max Bolus (the maximum amount
for a single bolus)
The default settings and ranges for
Bolus Settings are as follows:
•
Carbs (default: off if no Carb Ratio
is defined)
•
Insulin Duration (default: 5 hrs;
range: 2 to 8 hrs)
•
Max Bolus (default: 10 units; range:
1 to 25 units)
Insulin Duration and Insulin on
Board (IOB)
Your t:slim X2 Pump remembers how
much insulin you have taken from
previous boluses. It does this by relying
on the Insulin Duration. The Insulin Du-
ration reflects the amount of time that
insulin is actively lowering your BG.
Consult your healthcare provider to
accurately set your Insulin Duration.
While the Insulin Duration setting
reflects how long insulin from previ-
ous boluses lowers your BG, the IOB
feature reflects how much insulin is
remaining in your body from previous
boluses. IOB is always displayed on
the Home Screen and is used in bolus
delivery calculations when applicable.
When a BG is entered during bolus
programming, your t:slim X2 Pump will
consider any active IOB and calculate
an adjusted bolus if necessary.
1. From the Home Screen,
tap
OPTIONS .
2. Tap My Pump .
3. Tap Personal Profiles .
4. Tap NEW to create a new profile.
5. Using the onscreen keypad,
enter a profile name (up to 16
characters) and tap
SAVE .