Tandem t:slim X2, Руководство пользователя, Страница: 64 / 198

Customer Technical Support:
(877) 801-6901 64
Chapter 5 – Infusion Site Care and Loading Cartridge
5.2 Cartridge Instructions
for Use
For complete cartridge labeling, consult
the Cartridge Instructions for Use
included in the t:slim Cartridge box.
5.3
Filling and Loading a
t:slim Cartridge
This section describes how to fill the
cartridge with insulin and load the
cartridge into your t:slim X2 Pump. The
single-use disposable cartridge can
hold up to 300 units (3.0 mL) of insulin.
WARNING
DO NOT use any other insulin with your pump
other than U-100 Humalog
®
or NovoLog
®
. Only
Humalog
®
and NovoLog
®
have been tested
and found to be compatible for use with this
Pump. Use of insulin with lesser or greater
concentration can result in under delivery or
over delivery of insulin. This can cause very
high or a very low blood glucose.
WARNING
DO NOT reuse cartridges or use cartridges
other than those manufactured by Tandem
Diabetes Care, Inc. Use of cartridges not
manufactured by Tandem Diabetes Care, Inc. or
reuse of cartridges may result in over delivery
or under delivery of insulin. This can cause very
low or very high blood glucose.
Before you begin, make sure you
have the following items:
•
1 unopened cartridge
•
3.0 mL syringe and fill needle
•
Vial of Humalog
®
or NovoLog
®
insulin
•
Alcohol prep swab
•
1 new infusion set
•
Infusion set Instructions for Use
NOTE: Removing the Cartridge
Do NOT remove the used cartridge from the
pump during the load process until prompted
on the t:slim X2 Pump screen.
The illustration identifies the
Luer-lock and insulin fill port used in
the cartridge filling process.
Luer-lock
Tail of the
Cartridge
Insulin
Fill Port