29
Group Name
Ȇ
Up to 8 characters can be entered.
Ȇ
GROUP1 is registered using the default settings. Select a name already in use,
make a few changes to this name and register it as a different Group Name.
Ȇ
Once a Registration has been made, the Group Name cannot be changed.
Communication Frequency Channel
Ȇ
Put a check next to [set] to select a channel number. It is possible to set one
Communication Frequency Channel (channel 0-15) to each Group.
Ȇ
The default setting of Channel 0 is used for GROUP1.
Ȇ
If no setting is made, a channel will automatically be assigned and the settings
made with that channel.
Ȇ
Settings can only be made when making a New Group Registration.
Ȇ
Once a setting has been made it cannot be changed.
Ȇ
The selected communication (frequency) channel is used for communication with
Remote units in the same Group. Please note that if more than one Data
Collector is trying to communicate at the same time on the same communication
channel, communication may become jammed and
unstable.
Remote Unit Name
Ȇ
Up to 8 characters can be entered.
Ȇ
Select a name already in use, make a few changes to this name and register it
as a different Remote Name.
8.
Click the [Register] button to fi nish the registration.
* If you wish to register a multiple number of Remote Units to the same Group,
proceed by placing and replacing the Remote Units you wish to register on the
Data Collector and carry out registration as in steps 7 to 8 for each one using a
different Remote Name.
* If you wish to register to a different Group Name, proceed by placing and
replacing the Remote Units you wish to register on the Data Collector and carry
out registration as in step 7 for each one using a different Group Name.
When a registration has been
completed, it will appear in the
Registration Contents List.
