T&D VLD-5EU Скачать руководство пользователя страница 18

Страница: 18 / 104

User Management Tools: Other Functions

The following operations can also be carried out using the User
Management Tools.

Modify User Authorization: [User Management] Menu

*The [Modify User Authorization] window can also be opened in the pop up menu that

appears by right clicking on a User ID in the User ID List.

Here you can make modify authorizations for an already registered
user.

The only modifi cations that can be carried out for the Administrator (User ID:
admin) are to make changes to the Password and the memo contents.

The User ID cannot be modifi ed.

From the [User Management] Menu, select [Modify User

Authorization].

Click on the Password or other tab to make changes.

The User ID and Password can be made up of between 5 and 16 characters
using alphabet, numbers, " - " (hyphens) and "_" (under bars).

A distinction will be made between upper and lower case alphabet, so please

be careful. Ex. abc123 and ABC123 will be treated as different.

After having fi nished the desired modifi cations, click the [OK]

button to fi nish.

[User Manegement] menu

[OK] button

Содержание VLD-5EU









































































































Результаты поиска

Содержание VLD-5EU

Отзывы:

Похожие инструкции для VLD-5EU

Бренды по названию

Популярные бренды

T&D VLD-5EU, Руководство пользователя

Результаты поиска

Содержание VLD-5EU

Отзывы:

Похожие инструкции для VLD-5EU

Бренды по названию

Популярные бренды