ⅰ
●
All rights of this User’s Manual belong to T&D Corporation. It is prohibited to
use, duplicate and
/
or arrange a part or whole of this User’s Manual without
the permission of T&D Corporation.
●
Microsoft
®
and Windows
®
are registered trademarks of Microsoft Corporation
USA and are binding in the USA and all other countries. Company names
and product names are trademarks or registered trademarks of each
company.
●
Specifications, design and other contents outlined in this manual are subject
to change without notice.
●
On screen messages in this manual may vary slightly from the actual
messages.
●
Please notify the shop where you purchased this product or T&D Corporation
of any mistakes, errors or unclear explanations in this manual. T&D Corporation
accepts no responsibility for any damage or loss of income caused by the use
of our product.
●
This product has been designed for private or industrial use only. It is not for
use in situations where strict safety precautions are necessary such as in
connection with medical equipment, whether directly or indirectly.
●
We are not responsible for any malfunction or trouble caused by the use of
our product or by any problem caused by the use of measurement results
of our unit. Please be fully aware of this before using our product.
●
Some of our products, which come under the category of strategic goods in
foreign trade law, need the permission of the Japanese government to be
exported outside of Japan.
●
This User’s Manual cannot be reissued, so please keep it in a safe place.
●
Please read the warranty and provisions for free repair carefully.
■
Notices about this User’s Manual
In order to properly use this product, please carefully read this manual before
using.T&D Corporation accepts no responsibility for any malfunction of and
/
or
trouble with this product or with your computer that is caused by the improper
handling of this product and will deem such trouble or malfunction as falling
outside the conditions for free repair outlined in the attached warranty.
Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524
