T&D RTR-500DC, Руководство пользователя

Страница: 24 / 88

Getting Ready
24
Installing the Software
Make sure to install the software before connecting the Unit to a
PC with a USB cable.
If you have connected a Unit to your computer before installing the USB device driver,
make sure to click the [Cancel] button in the Wizard window when it pops up on the
computer display. Then disconnect the USB cable from the Unit.
Before Installing the Software:
Is Windows operating properly?
If Windows is not operating properly, the software may not be installed correctly
or it may not operate properly.
Make sure to check that the OS you are running and "RTR-500DC for Windows"
are compatible.
Microsoft Windows 10 32 / 64 bit
Microsoft Windows 8 32 / 64 bit
Microsoft Windows 7 32 / 64 bit
Microsoft Windows Vista 32 bit (SP1 or later)
- For details about the necessary operating environment, see page 83.
Quit all open applications.
If you are running other applications, make sure to quit them before installation.
If you have any permanently active software, such as a virus check or scan
program in your computer, make sure to also quit them.
To install "RTR-500DC for Windows", it is necessary to have Adminis-
trator rights (Computer Administrator) for the computer in which you
wish to install it.