T&D RTR-500, Руководство пользователя

Страница: 35 / 44

Notes about Operation 33
For using an RTR-500NW/500AW
without connecting to the Internet
- It will be necessary to prepare an e-mail server and/or and FTP server within
your network. If it difficult to set up a server, you may want to purchase a
storage device with a built-in FTP server function.
The settings necessary for connecting to a network vary greatly. Please
contact your network administrator for details.
Q4: How can I return the RTR-500NW/500AW back to its original
factory default settings?
A: Connect the target RTR-500NW/500AW to your PC with a USB cable. In
the RTR-500W Settings Utility , under the [Operations] Menu, select [Return
Base Unit to Factory Default Settings] and the settings will be returned to
the default factory ones.
Factory Default Settings
Base Unit Name (device name)_(serial number)
Unit of Temperature SDgrF
LAN Password password
DHCP ON
Communication Port 62500
- Notes: If DHCP can not be used, the following IP Address and Subnet
Mask will be assigned as the default settings.
IP Address 192.168.5.100
Subnet Mask 255.255.0.0
Q5: If there is a blackout or other loss of power, are the settings
still saved in the RTR-500NW/500AW?
A: If there is a loss of power including from a blackout, all settings, addresses
and registration info are saved. However, note that, if the power outage
lasts for more than one day the clock settings may be reset. If the clock
settings have not been set to be automatically adjusted, it will be necessary
to re-make clock settings after the recovery of power.
Q6: Can I view the RTR-500NW/500AW MAC address?
A: The MAC address for the RTR-500NW/500AW can be found under the
[Settings Table] Menu in the "Settings Window" of the RTR-500W Settings
Utility.