T&D MCR-4TC, Руководство пользователя

Страница: 54 / 64

52
Other
Troubleshooting
Q1.
The computer does not seem to recognize the
MCR-4TC, why not?
A1.
Please check the following:
Check the MCR-4TC
Check the USB connection between the computer and the
MCR-4TC.
Check the Computer
• Make sure that the software has been installed properly and is
working.
• The USB driver installation may not have been installed correctly.
Please see [Help for Unit Recognition Failure] in the Help menu,
and check the USB driver.
• Connect a different USB device (mouse, digital camera, etc...)
other than the MCR-4TC to your computer and see if it operates
properly.
• If your computer has more than one USB port, try connecting the
USB cable to a different port.
• If you have access to another computer, try seeing if
communication works with the other computer.
If after checking and trying the above there is no improvement
please contact the distributor where the product was purchased.
Q2.
The first reading of recorded data is invalid data, why?
A2.
One of two scenarios is possible:
• When recording average values, the first recorded value is invalid
because an average cannot be calculated.
• In Group Recording with MCR-4V as the Master, when the Preheat
function has been set to ON (recording method: instantaneous
values only) and the preheat time is set to longer than the waiting
time before recording start, the first data reading will be invalid
because preheating has not been completed.