T&D MCR-4TC, Руководство пользователя

Страница: 25 / 64

23
Using MCR-4TC
Group Operations via Master
Group operations such as the starting and stopping recording for the
connected units can only be performed via the Master. Upon the start of
a group recording, the main recording settings will be temporarily
copied to all connected Slaves. Upon the stopping of recording all
copied settings will be returned to their original state.
Using “MCR for Windows”, it is possible
to start and stop recording by group by
connecting the Master to a PC via USB.
Master Slaves
Settings Controlled by the Master:
Settings for Recording Mode, Recording Method, Recording Interval,
and Recording Channels
Settings not Controlled by the Master:
Channel Name and Thermocouple Type
IMPORTANT
- Operations related to the SD memory card (such as Quick Format and Memory Card
Test) cannot be performed by group via the Master.
- To change the Thermocouple Type, either change directly on the target connected
Slave unit, or use “MCR for Windows” and connect each Slave unit to the PC with a
USB cable.
- The Channel Name can only be set or changed via “MCR for Windows”.