147
D14049.03
MAY 2008
Grey Headline
(continued)
TANDBERG
VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Quick Guide to VCS Traversal Client - Server Configuration
Full details of how to configure a VCS Control
and VCS Expressway as traversal client and
server respectively are given in the following
pages. However, the basic steps are:
Ensure the VCS Control has been
configured with an Authentication
username and Authentication password to use
as its External Registration Credentials. These
can be added or edited via
VCS Configuration >
Authentication > Configuration
(or by clicking on
the
Edit Authentication Username/Password
link in the Edit Zone page for an existing
Traversal Client Zone).
On the VCS Expressway, create a
Traversal Server Zone (this represents
the incoming connection from the VCS Control).
In the
Client authentication username
field,
enter the VCS Control’s Authentication
username.
On the VCS Expressway, add the VCS
Control’s authentication username and
password as credentials in the authentication
database. These can be added or edited via
VCS Configuration > Authentication > Local
Database
, or by clicking on the
Add/Edit Local
Authentication Database
link in the Edit Zone
page.
On the VCS Control, create a Traversal
Client Zone (this represents the
connection to the VCS Expressway). Enter the
VCS Expressway’s IP address or FQDN in the
Primary address
field.
On the VCS Control, configure all the
modes
and
ports
in the Protocol section
to match identically those of the Traversal
Server Zone on the VCS Expressway.
Overview
VCS Expressway (Server)
VCS Control (Client)
