3
SCSI Identification on Internal Tape Drive
Make sure that the drive unit has the proper SCSI-ID before it is connected to a
computer system. Refer to manuals for host computer and application software to
obtain the correct ID.
For correct mounting of ID-jumpers at the rear of the internal drive, please refer to
Figure 3
and
Table 1
for internal tape drive.
Figure 3 Drive connectors
The factory default drive
number setting is SCSI ID = 2.
If the drive has to be set up
with a different unit number,
the jumpers (on the Service
Connector) have to be
connected according to
Table 1.
Example:
SCSI ID = 2
Table 1
Service Connector jumper settings for SCSI
ID (Dark = Jumper mounted)
Power Connector
SCSI Connector
Service Connector
SCSI ID=0
SCSI ID=1
SCSI ID=2 Default
SCSI ID=3
SCSI ID=4
SCSI ID=5
SCSI ID=6
SCSI ID=7
SCSI ID=8
SCSI ID=9
SCSI ID=10
SCSI ID=11
SCSI ID=12
SCSI ID=13
SCSI ID=14
SCSI ID=15
