TANDBERG Video Portal
Data port Command Interface User Guide
*c xConfiguration Dialplan Entry 4 Property 14 Name: "entry5_label"
*c xConfiguration Dialplan Entry 4 Property 14 Value: "Menu"
*c xConfiguration Dialplan Entry 4 Property 15 Name: "entry5_nettype"
*c xConfiguration Dialplan Entry 4 Property 15 Value: "H323"
*c xConfiguration Dialplan Entry 4 Property 16 Name: "entry5_bnumber"
*c xConfiguration Dialplan Entry 4 Property 16 Value: "90370018"
Ethernet
Sets LAN port speed.
NOTE! The Video Portal needs to reboot before the changes will apply
.
Ethernet <speed>
---
parameters:
•
speed: auto/10half/10full/100half/100full.
The speed is either set to auto or manually
from 10mb half duplex to 100mb full duplex. When set to auto the Video Portal will
automatically negotiate with the network and use the best available setting.
Example of
Ethernet
feedback:
*c xConfiguration Ethernet Speed: Auto
H323CallSetup
Configures for direct or via gatekeeper calling
H323CallSetup Mode: <Direct/Gatekeeper>
--
Example of H323CallSetup feedback:
*c xConfiguration H323CallSetup Mode: Direct
H323Gatekeeper
Sets gatekeeper parameters.
NOTE! H.323 services must be set before the Video Portal can be registered to a gatekeeper.
H323Gatekeeper Address <IPAddr>
or
H323Gatekeeper Authentication Mode <Auto/Off>
or
H323Gatekeeper Authentication ID: <S: 0, 50>
Or
H323Gatekeeper Authentication Password: <S: 0, 50>
---
sub-commands:
•
Authentication Mode
configures the use of authentication against a gatekeeper.
•
Authentication ID
Configures the user name used within an authentication challenge
•
Authentication
Password
sets the password used within the authentication process.
NOTE! Authentication Password is write only.
Example of
H323Gatekeeper
feedback:
D1392602
14
