TANDBERG Video Portal
Data port Command Interface User Guide
1.
Introduction
The
TANDBERG Video Portal Data port Command Interface User Guide
contains guidelines on how to use the
textual command interface supported by the Video Portal system, further referred to as Video Portal. The Data port
Command Interface can be accessed through Telnet via the LAN interface or through RS-232 by connecting a serial
cable to the serial interface connector, referred to as the
Data port
(ref. chapter 2). Three Telnet sessions can be
connected to the Video Portal at the same time in addition to the RS-232 connection.
If, after reading this manual, you require additional information concerning the use of the
TANDBERG Video Portal
Data port Command Interface
, please contact your local TANDBERG dealer who will be able to supply you with
relevant information for special applications.
D1392602
3
