D14129.02—NOVEMBER 2008
36
Codec C90
Administrator Guide
Contents
Introduction
Getting started
About the menus
About the settings
Settings Library
Cameras
Appendices
Contact us
Cameras
Best view (beta)
Exit
Best view—Face recognition
This camera is capable of face recognition when used with
TANDBERG C90 Codecs. Consequently, the functionality is subject
to change without further notice in order to take advantage of further
developments.
NOTE:
Observe that the
Best view
feature is still a preview feature.
The face recognition system aims to search for faces in order to
optimize the picture frame, hence the name
Best view
. Once a face
or group of faces has been detected camera zoom and camera angle
will be changed accordingly to obtain an optimal presentation on the
screen.
Kindly observe the following:
The
•
Best view
optimization process may take up to 5 seconds.
The detection of faces works better when people look towards the
•
camera.
The area from the eyebrows down to just below the lips should be
•
uncovered.
Beard is normally not a problem.
•
Using Best view
Note that
Best view
works with TANDBERG C90 Codecs only!
Press the
1.
Layout
key on the remote control to display the
Layout menu. Select
Selfview
to be shown as required.
Press the
2.
Home
key on the remote control to display the
Home menu and select
Camera control
In the Camera control menu, locate the
3.
Best view
button at the
bottom of the screen.
Press the corresponding
4.
Soft
key on the remote control to start
the
Best view
optimization process. Look towards the camera for
about five seconds.
The system will now look for human faces and adjust the zoom
5.
and camera angle to obtain a best fit.
Press the corresponding
Soft
key to start the Best
view optimization process.
The
Best view
feature is found
in the
Camera control
menu.
