D14646.01—MARCH 2010
20
TANDBERG Codec C40
The Physical Interface Guide
Contents
Introduction
The physical interface
Appendices
Contact us
www.tandberg.com
!
Basic setup when connecting to Codec C40
The illustration shows you the basic setup when connecting the monitor, PC,
camera, microphone, loudspeakers (if applicable), LAN and line voltage to the
TANDBERG Codec C40.
Make sure the codec has been switched off and
disconnected from the line voltage whenever
connecting or disconnecting other equipment.
Power Switch
After having
connected the
cables, you may
turn the codec
On.
INPUTS
OUTPUTS
TANDBERG Basic Setup
1
1
The main connectors for
TANDBERG basic setup
are highlighted in orange.
Video to the camera
(HDMI to HDMI)
LAN/
Ethernet
Mains
Power
Cable
Loudspeakers
(optional)
Camera control cable
(RJ45 to DSUB)
PC (audio to Line In 1)
Monitor (audio from
HDMI 1 or Line Out 1-2)
Microphone
Contents
Introduction
The physical interface
Appendices
Contact us
Appendices
Contents
Introduction
The physical interface
Appendices
Contact us
Appendices
