D14646.01—MARCH 2010
12
TANDBERG Codec C40
The Physical Interface Guide
Contents
Introduction
The physical interface
Appendices
Contact us
www.tandberg.com
Audio HDMI in–/output
HDMI In 2
1 x HDMI connector with audio input.
Typical use.
Use HDMI In 2 (2–8 channels) to
connect to external playback devices as DVD players.
Each input support up to two channels at 48kHz
sampling rate.
Unused, but connected audio inputs should be set to
Off to avoid unwanted audio/noise.
HDMI Out 1
1 x HDMI connector, audio out 1
Use HDMI Out 1 to connect to a flat screen with
speakers. HDMI 1 will provide stereo audio speaker
signals at 48kHz.
Main connector.
The HDMI output 1 is the main
connector to the monitor.
HDMI 1.
Audio from far end and PC.
Pin: 19 17 3 1
Pin: 18 16 4 2
HDMI pin–out
External view of socket
Please refer to previous pages for pin–out
scheme.
HDMI Out
with audio
HDMI In
with audio
Contents
Introduction
The physical interface
Appendices
Contact us
The physical interface
Contents
Introduction
The physical interface
Appendices
Contact us
The physical interface
