3
SCSI Identification
Make sure that the drive unit has the proper SCSI-ID before it is connected to a
computer system.
Refer to manuals for host computer and application software to obtain the correct
ID. For correct mounting of ID-jumpers at the rear of the drive, please refer to
Figure 3 and Table 1.
External drives have a thumb-wheel switch to set the SCSI-ID (see Figure 6).
Figure 3
Drive connectors
The factory default drive
number setting is SCSI ID = 2.
If the drive has to be set up
with a different unit number,
the straps (on the Service
Connector) have to be
connected according to
Table 1.
Example: SCSI ID = 3
Table 1
Service Connector strap settings
for SCSI ID (Dark = Strap mounted)
Power Connector
SCSI Connector
Service Connector
SCSI ID=0
SCSI ID=1
SCSI ID=2
SCSI ID=3
SCSI ID=4
SCSI ID=5
SCSI ID=6
SCSI ID=7
SCSI ID=8
SCSI ID=9
SCSI ID=10
SCSI ID=11
SCSI ID=12
SCSI ID=13
SCSI ID=14
SCSI ID=15
