49
MXP Series Video Endpoints
User Guide
D1479201 MXP Series User Guide, May 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
Requesting and releasing floor…
Assigning floor…
When you request floor, your video will
be broadcasted as the large picture
to all other parties in the conference.
Request floor
is useful when you want
to speak or display something in front of
all participants.
Select
Release Floor
and press the
OK
key when you are done to make the
floor available for other parties in the
conference.
An indicator appears in the upper right
corner when you have the floor and it
disappears when you release floor.
Assigning floor
If your system is the one connected to
all the other systems, you will be the
host of the meeting and you will be able
to assign the floor to others.
Automated jumping to full screen
You may have your system
administrator set up the system
to switch to full screen each time
someone requests the floor.
This is done in the
Control Panel
—see
Floor to Full Screen
in
Settings
>
Video
. More information on this can be
found in the
Administrator Guide
which
can be downloaded from
http://www.
tandberg.com/docs
.
Observe that you may not have access
to these settings, as they may have
been password protected by your
system administrator.
Request and release floor
Giving the screen to the party speaking
1.
In the main menu, navigate to
Services
and press the
OK
key…
2.
Navigate to the
Request Floor
icon and
press
OK
to request floor. Once you have
the floor, the icon changes to
Release
Floor
. Press
OK
to release floor again.
1.
Navigate to the
Services
submenu in the same way as
when requesting floor (above) and
then navigate to
Assign Floor
and
press
OK
.
2.
Select whom to assign floor to and press
OK
.
www.cisco.com
