44
MXP Series Video Endpoints
User Guide
D1479201 MXP Series User Guide, May 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
Taking a snapshot using the menu…
Displaying a snapshot…
T
he system can take a snapshot of
your live video. Snapshot is handy
when you are in a call with a system
that does not support dual video
stream. Use the snapshot feature to
show a snapshot of your presentation
and continue the meeting with main
camera.
Your video system can send snapshots
in a point-to–point video meeting
only, sending snapshots in MultiSite
meetings is not supported.
The following should be observed:
•
When displaying a snapshot, it will al-
ways be the latest snapshot taken that is
displayed, regardless of which end (near
or far) took it.
•
Any snapshot taken is deleted once the
call is terminated.
•
The snapshot feature uses H.261 Annex
D. Consequently it will fail to work when
using H.264 video compression.
Taking a snapshot using the remote
control
In a point-to-point call press the
Snapshot
key (the
*
key).
If the
Number Key Settings
menu has
been set to
Touch Tones
, pressing the
Snapshot
key will not be interpreted as
snapshot, but as a touch tone.
The
Number Key Settings
must have
been set to something else to make
the key work as a
Snapshot
key. This
is done in the Control Panel of your
system. Your system administrator may
have password protected this area.
Likewise, this will not work when you
are in an input field requiring numerical
or text entries. The
*
will then be
interpreted as just
*
.
Snapshots
When you are in a call with a system that does not support dual video stream
In a call, press the
OK
key to produce
the main menu and navigate to the
Presentation
icon…
… then press the
OK
key to display the
Presentation
menu. Navigate to the
Snapshot
tab and then down to the
Take
New Snapshot
icon. Press the
OK
key to
take a snapshot and send it to the far end.
In a call press the
OK
key to
produce the menu line, if needed,
and navigate to the
Presentation
icon…
… then do as above, but select
Display
Snapshot
instead. Press the
OK
key to
display the snapshot.
www.cisco.com