Tandberg Data SUPERLOADER DLT -, Быстрый старт, Страница: 12 / 14

Load and unload cartridges
from a fully ejected magazine
There are two handles located on both
ends of the magazine. Move the slots
within the magazine by using these two
handles. You can use the two openings
along the top of the magazine and the
four openings along the bottom of the
magazine to load and unload cartridges
from the eight slots within each maga-
zine.
Handle
Handle
View of right side of right magazine
23
Use magazines
and magazine
blanks,
continued
Install a magazine
For detailed instructions, see the
User Manual.
Grasp the magazine by the handle with
one hand and support it underneath with
the other hand.
Push the magazine in until it clicks and
locks into place. Make sure that you posi-
tion the magazine correctly; it should slide
smoothly. If the magazine does not slide
all the way in, verify that the magazine is
properly oriented to the autoloader. If the
magazine is backwards or upside down, it
will not slide and lock into place.
a
b
22