Table of Contents
Introduction ................................................................................................ 4
Step 1. Unpacking the StorageLoader........................................................ 5
Step 2. Installing the StorageLoader in a Rack .......................................... 6
Step 3. Connecting Power Cable.............................................................. 10
Step 4. Removing the Transport Lock ..................................................... 11
Step 5. Running Power-On Selftest.......................................................... 11
Step 6. Setting the SCSI Address ............................................................. 11
Step 7. Connecting the SCSI Bus Cable .................................................. 12
Step 8. Connecting the Ethernet Connector ............................................. 13
Step 9. Restarting Your System ............................................................... 14
Step 10. BCR: Labeling of cartridges ...................................................... 14
Warning!
Do not apply power to or attempt to operate the
Tandberg Data StorageLoader until the
transporter locking screw is removed. This
operation is necessary to prepare the unit for
normal operation.
