Tandberg Data SLRTAPEDRIVE -, Инструкция по установке и эксплуатации

Страница: 23 / 367

Mounting a Tabletop Tape Drive
Wide/Narrow Configuration
All SLR external tabletop tape drives can be connected either to a
16 bit Wide SCSI or an 8-bit Narrow SCSI host adapter. SLR2-5
is provided with an external cable with a narrow connector. SLR7-
140 tape drives are supplied with a WIDE external connector. If
you plan to use SLR2-5 with a WIDE SCSI host adapter you will
need a Narrow SCSI host adapter Narrow to WIDE converter for
the external cable supplied with your SLR2-5 tape storage solution.
If you plan to use SLR7-140 with a narrow SCSI host adapter you
will need a Wide ®Narrow converter. More detailed information
regarding these converters and connecting 8 bit narrow SCSI
peripherals to 16 bit wide SCSI host adapter and 16 bit WIDE SCSI
peripherals to 8 bit narrow host adapters as well as purchasing
these converters, can be found at the following website.
www.adaptec.com/products/solutions/cables.html
External Tape Drive Installation
After the SCSI controller board has been installed and is
working properly, the tape drive can be installed. Before starting,
make sure the power Is turn off.
Tandberg Data
NOTE:
Do not apply or insert power cord until all connections have been made.
Tandberg SLR Installation and User's Guide 19