Tandberg Data SDLT 600, Руководство по эксплуатации продукта

Страница: 3 / 126

SDLT 600 Product Manual
iii
Revision History
The table below lists all revisions made to this document in chronological order.
User Manual Statements for Class A Equipment
(Internal SDLT 600 Tape Drive System)
This equipment generates, uses, and may emit radio frequency energy. The equipment has been tested
and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against radio frequency interference in a
commercial installation.
Operation of this equipment in a residential area may cause interference, in which case the user at his
own expense will be required to take whatever measures may be required to correct the interference.
Any modifications to this device—unless expressly approved by the manufacturer—can void the user’s
authority to operate this equipment under Part 15 of the FCC rules.
Note: Additional information on the need to interconnect the device with shielded (data) cables or the
need for special devices, such as ferrite beads on cables, is required if such means of interference
suppression was used in the qualification test for the device. This information will vary from device to
device and needs to be obtained from the EMC (Electromagnetic Compatibility) group or product
manager.
Warning!
This is a Class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
Achtung!
Dieses ist ein Gerät der Funkstörgrenzwertklasse A. In Wohnbereichen können bei Betrieb dieses
Gerätes Rundfunkstörungen auftreten, in welchen Fällen der Benutzer für entsprechende
Gegenmaßnahmen verantwortlich ist.
Warning!
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Document Release Date Summary of Changes
A01 March 30, 2004 Initial Release