Tandberg Data
Using iSCSI Software Targets
__________________________________________________________________________________________________
9-4
Tandberg Viking Series Storage Server Administration Manual
o
Select the identifier type from the
Identifier Type
list and
type the identifier in the
Value
field.
o
Repeat steps b and c for each identifier you want to add.
o
Click
OK
.
o
Click
OK
again to close the
Advanced Identifiers
page.
8.
Click
Next
.
9.
Click
Finish
to complete the wizard and create the iSCSI Target.
9.1.5. Create Virtual Disk Wizard
This section describes how to create an iSCSI Virtual Disk using the Create
Virtual Disk Wizard.
Notes
In order to create iSCSI Virtual Disks, it is required that physical disks are formatted
as NTFS.
1.
In the
Microsoft iSCSI Software Target
MMC snap-in, click the
Devices
node.
2.
On the details view (right pane) of the
Devices
node, right-click a
volume and select
Create Virtual Disk
.