Tandberg Data
Distributed File System
__________________________________________________________________________________________________
7-24
Tandberg Viking Series Storage Server Administration Manual
o
Confirmation
- Click
Close
to close the wizard.
o
Replication Delay
- Click
OK
to close the dialog box that
warns you about the delay in initial replication.
After you finish the wizard, click
Data Distribution
in the console tree, and
then review the contents of the
Connections
tab. It should look similar to the
following figure:
Notice that in the
Schedule Type
column, connections to and from the new
member show
Custom Connection Schedule
instead of
Replication
Group Schedule
. These show
Custom Connection Schedule
because
you chose a custom schedule when you added the new member. Creating
custom schedules for individual connections allows you to fine-tune the
replication interval and bandwidth used when replicating to specific
members. Although it isn’t obvious in the user interface, each connection
marked
Custom Connection Schedule
is a separate schedule. You can
modify one schedule marked
Custom Connection Schedule
, but the other
custom schedules are not affected.
Notes
To change how the items are grouped, click a column heading. For example, to
group the items by schedule type, click the Schedule Type heading.
Entries marked
Replication Group Schedule
use the default replication
schedule; this schedule is applied to all connections in the replication group
that do not have a custom schedule. To modify the default replication
schedule, right-click the Data Distribution replication group in the console
tree, click
Properties
, and then click
Edit Schedule
. To change a
connection schedule from a custom connection schedule to the replication
group schedule or vice versa, on the
Connections
tab in the details pane,
double-click the connection, click the
Schedule
tab, and then click
Replication group schedule
or
Custom connection schedule
.
