Tandberg Data Magnum 224, Инструкция по эксплуатации

Страница: 12 / 12

12
OF
12
The library is now ready to resume operation. The new tape drive defaults to the following SCSI IDs:
C
ONFIRMING THE
I
NSTALLATION
You may want to perform a few load and unload operations and back up several megabytes of data to ensure
that the library and the newly installed tape drive (or tape drives) are communicating correctly.
Download and install the tools from www.tandbergdata.com . The readme file that accompanies the program (or
the online help for the Windows version) provides instructions for using the tools.
For questions regarding software configuration, operation (including how to perform a backup operation), or
installation—contact your software provider.
Copyright 2007 Tandberg Data Corporation: Tandberg Data, Exabyte, the Exabyte Logo, EZ17, M2, SmartClean, VXA, and VXAtape are registered trademarks; ExaBotics and MammothTape are
trademarks; SupportSuite is a service mark. Linear Tape-Open, LTO, the LTO Logo, Ultrium and the Ultrium Logo are trademarks of HP, IBM, and Quantum in the US and other countries. All other
product names are trademarks or registered trademarks of their respective owners.
P/N 1017476 Rev A June 2007 www.tandbergdata.com
#1017476A#
Library Tape Drive Configuration SCSI ID
Magnum 224
StorageLibrary T24
StorageLoader 2U LTO
Single half height tape drive 3
Two half height tape drives
Upper tape drive 4
Lower tape drive 3
Full height tape drive 3
! Important
You may need to reconfigure your backup application to recognize the new tape drive.
Refer to your application’s documentation for instructions.
Use LibTool to
Detect the library
View the library’s cartridge inventory
Move tapes into and out of the tape drive
Use LTOTool to
Detect the tape drive
Perform a Read/Write test