Installation
TANDBERG IBM Lotus Notes/Domino v 11.3 - Installation & getting started guide
Page 8 of 49
Installation
Complete the following steps to do a first-time installation and configuration of the TANDBERG Lotus
Notes/Domino integration package with the TANDBERG Management Suite.
The term ―Domino directory‖ is used throughout this document. The location of this directory is user
configurable during installation, and can for example be C:\Lotus\Domino\.
The integration files are included as part of the NotesIntegration.zip file found in the Setupfiles folder
on your TMS Installation Media. The archive includes three zip files targeted for version 6.x, 7.0/8.0,
and 8.5 of Notes/Domino:
LotusNotesIntegrationForNotesV85.zip for version 8.5 of Notes
LotusNotesIntegrationForNotesV70.zip for version 7.0 and 8.0 of Notes
LotusNotesIntegrationForNotesV6x.zip for any version of Notes V6.x that the integration supports.
User Account Control (UAC)
TANDBERG recommends that this setting is on for increased Domino server security. An
administrator can go to
Control Panel > User Accounts
and c
lick ―Turn User Account Control on or
off‖ to turn the feature on.
Copying the required files to the Domino Server (Version 6.x)
Note: This section is only applicable if you are running version 6.x of Notes/Domino.
1. Copy the LotusNotesIntegrationForNotesV6x.zip file to your Domino Server and extract it to a
temporary folder. If you are using FTP to copy files use binary mode.
2. Extract the Javafiles.zip file to a temporary directory on the Domino server:
a. Copy TMSConference.jar (in the bin directory of the Javafiles.zip file) to the jvm\lib\ext
subdirectory of the Domino directory.
The lib directory of the Javafiles.zip contains three zip files:
i.
axis_1_3.zip (contains the Apache axis binaries)
ii.
jaxp_1_3.zip (contains the jaxp binaries)
iii. lib.zip
b. Install jaxp_1_3 either by extracting the binaries from the jaxp_1_3.zip file, or by downloading
it from the site provided in the Requirements chapter.
Domino ships with an old version of JSR 206 (Java API for XML processing). Jaxp_1_3 is a
newer version of JSR 206 that is needed to run the Notes integration. It is important that the
jaxp_1_3 files are loaded, and not the old one. This can be done in one of two ways: