Chapter 2 Installing the Tape Drive
Installing the Internal SATA Tape Drive
DLT-V4 Product Manual
31
Figure 17 Securing the Internal
SATA Tape Drive in the
Installation Bay
2
Replace the cover on the server or workstation.
3
Connect the power cord to the server or workstation and any
peripheral devices that you detached earlier.
4
Power on the server or workstation and allow its operating system to
start.
5
Check the tape drive to make sure it is working properly. See
Power-
On Self-Test (POST) Indicator Activity
on page 47 to learn about the
tape drive’s self-test and initialization features.
Note:
Some servers and workstations require mounting rails for
internal devices. Contact the server or workstation
manufacturer for information.
