6. Cleaning and Maintenance
It is important to clean the device after every use. If samples or
reagents have been spilled, it is important to clean the device
immediately to avoid damage or contamination of samples.
Wear gloves and appropriate personal protective equipment. If
the device is used with biohazardous materials, dispose of any
cleaning materials used in accordance with your institutional
guidelines.
The device may go through a run with the magnetic rods
unprotected. If this happens, the magnetic rod needs to be
cleaned immediately.
To clean the magnetic rods, wipe with a soft cloth dampened with
pure water. Do not use alcohol solvent.
If the magnetic rods cannot be cleaned, please contact TANBead
(Tel: +886-3-3167568) for technical assistance.
7. Disposal
In case the product is to be disposed of, the relevant legal
regulations are to be observed. As disposal regulations may differ
from country to country, please contact your supplier if necessary.
Please follow your institutional and country-specific requirements to
handle the disposal of accessories. Device must be decontaminated
prior to disposal.
37
ENG
LI
SH
