Main Menu
SPARROWHAWK
Submenu Auto Color
Select the
AUTO COLOR MENU
from the
SYSTEMS MENU
with the
UP
and
DOWN
keys and open the menu
step with the
PLUS
(
V+
) key.
The
AUTO COLOR MENU
shows following operational steps:
SYSTEM
Auto Color
Help
Power On
2
Probe Setup
2
opens the menu to select the type of the probe
Search
2
Calibrate
starts the automatically calibration for color
Processing
2
Brightness
starts the automatic calibration for brightness
Language
2
Measure
starts the manual measure mode
OSD
2
Status
Idle
shows the data activity at the probe port
Wall
2
x
0
shows the current x-value of the measured light
RGB Adjust
2
y
0
shows the current y-value of the measured light
Auto Color
2
Y cd/m
2
0
shows the current luma value of the measured light
Backlight
2
Whitepoint x
307
allows the individual setup for the x white point
Anti Sticking
2
Whitepoint y
321
allows the individual setup for the y white point
User Gamma
enables the measured user gamma
Note:
This menu is normally hidden and for service purposes only. Do not use to modify for
your individual use. For more details see the service section of this manual.
Note:
Only when User Gamma is enabled the measured LUT (look-up-table) effects the
displayed image. If not, the standard default LUT's will be used.
Close and save this menu step by pushing the
MENU
key once.
© 02.07 TAMUZ - LCD Video Monitors
LSM Digital Broadcast Monitor
Page - 81 -