TAMS S88-Booster, Руководство пользователя

Страница: 9 / 23

S88-2 English
Page 25
!
Checking the package contents
Check the contents of the package for completeness immediately after
unpacking:
§
one kit, containing the components listed in the parts list (see page
I) and one PCB or
§
one ready-built module,
§
one 6-core ribbon cable with plugs,
§
one manual.
Required tools and consumables
Make sure you have the following tools, equipment and materials ready
for use:
§
an electronic soldering iron (max. 30 Watt) with a fine tip,
§
a soldering iron stand,
§
a tip-cleaning sponge,
§
a heat-resistant mat,
§
a small side cutter and wire stripper,
§
a pair of tweezers and long nose pliers (not necessary for the
ready-built module),
§
tin solder (0,5 mm. diameter),
§
wire (diameter: > 0,25 mm² for all connections).
Safe and correct soldering
Caution:
Incorrect soldering can cause dangers through fires and heat. Avoid
these dangers by reading and following the directions given in the
chapter
Safety instructions . If you have had training in soldering you
can skip this chapter.