tams
elektronik
English
FD-R Basic 2
Slow flashing
Fast flashing
Number
of the MM-register to be
programmed
Value
of the MM-register to be
programmed
Put the vehicle on a track oval or a track section connected to the
central unit’s track output (not to the connection for the programming
track). Make sure no other vehicle than the one you intend to program
is set on the track as the decoder inside this vehicle might be
programmed as well.
Starting
the programming mode
Programming the decoder
1. Switch on the central unit or
perform a reset at the central
unit (pushing "stop" and "go"
simultaneously).
2. Set the current decoder
address (default value: 3) or
the address "80".
3. Set all functions to "off".
4. Push button "stop"
à
switch off the track voltage.
5. Operate the direction switch
and hold it in that position.
Push the button "go" at once.
6. As soon as the lighting
flashes, release the
direction switch.
1. Enter the number of the
register as a Motorola-address.
If necessary: with a leading "0".
2. Operate the direction switch.
à
Lighting flashes faster.
3. Enter the value you want to
set into the register
(as Motorola-address).
4. Operate the direction switch.
à
Lighting flashes more slowly.
Repeat steps 1 – 4
for all registers.
Push button "stop".
à
Programming mode
à
End of programming mode
Page 22
