tams
elektronik
!
English
FD-R Basic 2
6. Connections
Note the following comment in order to protect the
decoder from (maybe irreparable) damage!
Avoid all conducting connections between the decoder and
accessories connected to the decoder´s common return conductor for
all function outputs on the one hand and metal parts of the vehicle or
the rails on the other hand. Connections result for example from badly
isolated connecting wires (as well at the stripped ends of connecting
wires not in use) or insufficient fixing and isolating the decoder or the
accessory, for example. Risk of short circuit!
Before connecting the lighting and other accessories to the outputs
check if the output´s current is below the maximum permissible value
per output and the total current is below the safe load. Should the
permissible output current be exceeded, this normally results in
damage to the decoder.
You should under no circumstances connect the decoder´s return
conductor for all functions to vehicle ground. Risk of short circuit!
Page 14
