Installing the HP-IB Interface
Refer to the Owner’s Guide of your computer for instructions on opening
your computer and installing PCI boards.
Follow the instructions being careful to handle the interface board only by
its edges. After the board has been plugged in and the retaining screw
installed the computer should be reassembled.
Depending on the computer, it may be advisable to connect the small
Cannon connector of the required HP-IB cable to the interface card prior
to fully seating the PCI board. Reassemble the computer. Ensure that the
thumbscrews and the small connector are tight for a good connection.
HP-IB cable required with TAMS60488
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
