Selecting Other Parameters:
The HPIB Address, which by default is set to 21, is the bus address you
wish the interface to have at system power up.
System Controller should typically be left as yes, unless this interface will
be controlled by another System Controller attached to the same bus.
DMA with termchr refers to a DMA performance enhancement feature
provided by the controlling IC that is part of this interface.
This feature typically provides faster DMA throughput because the chip
itself can be instructed to cause and EOI signal when the programmed
termchr appears on the data lines.
We suggest you leave this as yes, for speed. This feature can be turned off
if necessary.
The rare case where this is necessary is where the application program
would generate an error because it is expecting the terminating character
and cannot respond to EOI.
Additional information on these functions is provided through the HELP
button.
When you are finished setting the configurable parameter, click OK. You
will then see your interface listed on the screen, such as:
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
