!
English
WIB-31 | WIB-32 | WIB-33
Preset 1
Preset 2
Applications /
Examples
Control units with few
function keys
Control units with few
function keys
Switching the
LEDs
F1: 1
st
half of LEDs
F2: 2
nd
half of LEDs
F1: all LEDs
Dim switch
to be switched with F4
to be switched with F3
Fluorescent tube
simulation
off
off
Random light
for AUX3
---
Orientation light
to be switched with F3
to be switched with F2
AUX1
F0, on at backwards
motion
F0, on at backwards
motion
AUX2
F0, on at forwards
motion
F0, on at forwards
motion
AUX3
Random light,
not to be switched
to be switched with F4
Preset 3
Applications /
Examples
Connection of couplings
to AUX1/3
Switching the
LEDs
F1: 1
st
half of LEDs
F2: 2
nd
half of LEDs
Dim switch
to be switched with F6
Fluorescent tube
simulation
on
Random light
---
Orientation light
to be switched with F5
AUX1
to be switched with F3,
Kick function
AUX2
F0, on at forwards
motion
AUX3
to be switched with F4,
Kick funktion
10. Check list for troubleshooting
Parts are getting too hot and/or start to smoke.
Disconnect the system from the mains immediately!
Possible cause: one or more connections are soldered incorrectly.
à
Check the connections.
Possible cause: Short circuit. The module is connected to locomotive
or carriage ground.
à
Check the connections. A short circuit can
result in irreparable damage.
The lighting goes on and off when the speed levels are turned up or
the lighting cannot be switched on or off.
Possible cause: The speed mode of the decoder and the digital
control unit do not correspond. Example: The central is set to the
mode 28 speed levels, but the decoder to the mode 14 speed levels.
à
Change the speed mode at the central and / or at the decoder.
The decoder does not react in analogue mode.
Possible cause: The analogue mode is switched off.
à
Alter the
value for CV #29.
Page 40
tams elektronik
