tams elektronik
Multi-Decoder MD-2
English
Motion sequences
You can set separately for each of the 8 servos:
Starting and end position
Rotational speed
Simple linear motion curve or linear motion curve with teetering
when reaching the end position (to be adjusted separately for the
two directions of motion)
Simple linear motion curve with constant
velocity.
It is not possible to break the motion sequence
before the end position has been reached.
When reaching an end position the motion
sequence is stopped automatically.
Linear motion with teetering at the end
positions (typical motion sequence of
semaphore signals and railroad crossing gates).
The teetering motion has to be set separately
for each direction of motion.
Driving the decoder via accessory decoder commands
Turnouts, servos or other accessories are operated via accessory
decoder commands in DCC or Motorola format, sent from the controla
unit to the accessory decoder´s addresses:
operating mode 1: 12 addresses
operating mode 2: 8 addresses
The decoder automatically recognizes the commands´data format. It is
possible to switch the outputs via mixed DCC and Motorola commands
as well as to operate one output alternately in DCC and Motorola
format.
Page 9
