tams elektronik
English
Multi-Decoder MD-2
6. Programming the decoder
You can program the configuration variables (CV) using a DCC digital
central unit. See the chapter in the manual of your central unit where
the byte wise programming of configuration variables (CVs) is
explained.
When using a Motorola central unit you can set the decoder address
with a programming push-button. Changing the other decoder´s
features is impossible with Motorola central units.
6.1. Programming decoder addresses
Addresses of the Multi-Decoder MD-2
Depending on the set operating mode, two or three consecutive
quadruple accessory decoder address blocks are assigned to each
decoder address.
Connecting area
1
Connecting area
2
Number of
accessory decoder
address blocks
Operating
mode 1
"
turnouts"
8 servos
4 solenoid
accessories or
8 other
accessories
3 blocks
(= 12 addresses)
Operating
mode 2
"
push-buttons"
8 servos
8 push-buttons
2 blocks
(= 8 addresses)
Page 22
